Availability: 7 in stock
Advantages:
It does not require you to replace the windshield. Solar-Y mounts on beams without removing the cover
Make the most of module efficiency with angles of up to 25° tilt, with verifiable sizing
Fully adjustable. The bases adapt to all beam shapes and the inclination of the modules is infinitely adjustable.
One product for all construction sites.
Verifiable sizing with snow and wind loads by regulations throughout Italy.
Cost-effective, the optimized structure allows you to increase the pitch between the triangles while minimizing the number of structures and fixings.
Configurable with South or East-West orientation.
Operation:
Configure the system based on the orientation and span of the beams and the angle of the photovoltaic panels.
Stick to the project specifications and quantities for all installation steps: Assemble the bases.
For the SUD variant, assemble the triangles by joining 1 Solar-Y Profile and 1 strut with the appropriate hinges.
Adjust the distance of the hinges from the end of the Solar-Y Profile.
For the EAST-WEST variant, use 2 Solar-Y Profile profiles (cut to size).
Place and attach the brackets to the concrete tiles.
Assemble the triangles to the brackets fixed on the beams using the M12 screws and nuts.
Bracing the triangular structures at the ends of each module group using the BP AL profile using the Fischer T.E. 4.8×32 mm self-drilling screw as a fixture.
If necessary, mount the secondary profile frame on top of the triangles using the PXC-AL joints.
Place the PV modules on the structure and lock them with Fischer clamps.
