Short and strong: the cost-efficient fixing made of hot-dip galvanised steel for use in non-cracked concrete.
* With assessment document (ETA) the hot dipped galvanized steel version is covered for external use with variable working life depending on environment and corrosion conditions.
* If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation.
* Simple assembly due to few taps and minimal slippage.
* Fischer bolt anchor FBN II K is a steel anchor for cost-effective fixings in non-cracked concrete.
* The short version is suitable for pre-positioned installation and push-through installation.
* The bolt anchor is made of hot-dipped steel and is recommended for railings, handrails or consoles. The FBN II K is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions.
* Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx.
* 3 mm out of the hexagon nut).
* When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
* The head embossing offers a simple control of the anchoring.
- ETA certification: relevant
